TU0425C-FT -
TUBING, POLYURETHANE, 5/32IN. (4MM)OD, CLEAR, cut to length by the foot
聲明:圖片僅供參考,請以實物為準!
- 制造商產品編號:
- TU0425C-FT
- 倉庫庫存編號:
- 70071251
由于產品數據庫龐大,部分產品信息可能未能及時更新,下單前請與銷售人員確認好實時在庫數量,謝謝合作!
TU0425C-FT產品概述
Applicable for compressed air, and general industry water. Consult SMC if using for other kind of fluid. Surge pressure must be under the max operating pressure. If exceeding that value, fitting may be damaged and tubing may burst.
Polyurethane tubing is fast becoming the ideal choice for pneumatic applications. It combines the elasticity of rubber with the chemical resistance normally reserved for plastics. Polyurethane can be put into two classifications, ester based and ether based. SMC offers both. Ether-based polyurethane is the preferred tubing material for general pneumatic applications due to its immunity to hydrolysis and its higher resistance to fungus and microorganism attacks. The ester-based polyurethane is a stronger compound but tends to hydrolyze with moisture. This hydrolysis process will degrade the material over time.
SMC's primary line of Polyurethane tubing is ether based, made from the highest quality compound available to ensure the longest tubing life.
Properties
Cut Resistance
Excellent Memory
Wide Temperature Range
Low Compression Set
Low Gas Permeability
Kink Resistant
Tear Resistant
Abrasion Resistant
Extreme Flexibility
Good Chemical Resistance
Specifications
Temp. Range: –4°F to 140°F
Max. Operating Pressure: 115 psi (68°F)
Hardness: Shore A 95