6GK57862BA606AB0 - 

The Rapid Roaming (RR) Access Points of the SCALANCE W740 Product Line offer the same features and functionalities as the W746-1 or W746-1PRO-Versions. In addition to that, these devices are equipped with the IPCF features.
The iPCF mode is recommended for applications with a requirement for real-time and predictable response times (deterministic response), even during roaming of moving stations from one access point to the next. This ensures that wireless PROFINET IO is supported and that safety-related signals, e.g. emergency stop, can be integrated into the wireless link. This means that even video signals from moving stations can be transmitted with a high level of quality.
The iPCF mechanism expands the IEEE 802.11 standard and must be available on both the station and the access point (e.g. SCALANCE W788-1RR). In a wireless field in which iPCF is used, no IEEE 802.11-compliant stations can be operated. iPCF is recommended for applications where wireless network nodes move along predefined paths (e.g. suspended monorail).
Features:

Dual Wireless Radio According to IEEE 802.11a/b/g for 2.4 and/or 5 GHz and up to 54 Mbit/s

IPCF, IPCF-MC Support

IEEE 802.11e for Wireless Multimedia (WMM)

IEEE 802.11i for Security

Wireless Distribution System (WDS) support for AP-AP Connections

Construction of Redundant Networks with The Rapid Spanning Tree Protocol (RSTP)

VLAN Support

Modern Security Mechanisms (e.g.WPA2, AES,IEEE 802.1x, RADIUS)
In Client Mode: Network and Port Address Translation (NAT/PAT)
Specifications:

Rugged Plastic Enclosure (Plexi-Glass Type), Shock and Vibration-Proof for Severe Mechanical Loading

Tamper-Proof (No Connectors Visible)

High IP65 Degree of Protection Against Dust and Water Jets

Temperature Range –40°C to +70°C

Resistant to Condensation

Resistant to UV Radiation and Saltwater Spray

4x R-SMA Sockets for the Connection of Remote Antennas

Version 1 × RJ45 connection for 10/100 Mbit/s with Power-over-Ethernet According to IEEE 802.3at Type 1 (Corresponds to IEEE 802.3af)

1 × 48 VDC Connection (Redundant Power Infeed), Optional Operation on 12 … 24 VDC or 100 … 240 VAC with Additional Power Supply Integrated into Device

1 × C-PLUG Slot

Function LEDs for Optical Signaling of Faults and Operating States

Mounting: Wall or, With Optional Mounting Set, on S7 Mounting Rail, 35 mm Standard Mounting Rail, or on a Pole