關于我們 | 聯系我們

The Libra Series of presettable counters is an economical and reliable solution to one or two preset level requirements. The LIBC1 and LIBC1E are the single preset versions and the LIBC2 and LIBC2E are the dual preset versions. All four units have a solid-state output and a Form C relay output for each preset. These units feature input configuration programmability, a full complement of control inputs, programmable timed outputs, non-volatile memory, and many other features which will satisfy most any single or dual preset level requirement. The Libra counters have two main counting actions, Reset to Zero (RTZ) and Reset to Preset (RTP). With RTZ, the counter resets to zero and counts up (if UP/DN terminal is at high level) and activates the outputs when the preset value(s) are reached. When RTP is used, the unit starts at the preset value and counts down (if the UP/DN terminal is at low level) and activates the output when zero is reached. For the 2-preset version, the count starts at preset 2 and counts toward zero. Output 1 fires when preset 1 value is reached and output 2 fires when the count reaches zero. There are eight modes of operation for the single preset unit and sixteen modes of operation for the dual preset unit. The timed output is programmed through the front panel buttons and can be programmed from 0.01 sec. to 99.99 sec. (The unit's timed output is set at the factory to be 0.1 sec.) The Libra counters have an internal non-volatile memory device which eliminates the need for battery back-up. When input power is removed, this device will maintain all data necessary for system operation. A Program Disable terminal is available, which is used to prevent accidental changes or tampering by unauthorized personnel to the preset(s) or timed output value(s). The front panel reset button can also be enabled or disabled by a rear panel DIP switch. These counters also have an on-line self-test, which checks all display driver and micro-processor hardware. The self-test can be run at any time without losing counts or missing a preset value. Power, input, and output connections are made via removable terminal strips located at the rear of the unit. These strips can accept one #14 AWG stripped wire. DIP switches at the rear of the unit are used to program the input configuration and to set the desired operating modes. The Libra Series counters have a metal die-cast front bezel, which is sealed, and meets NEMA 4/IP65 specifications for wash-down and/or dust when properly installed. Mounting clips are provided for easy panel installation.

Brand/Series	Libra Series
Cut Out, Panel	2.68 L x 2.68 H in., 68 L x 68 H mm
Depth	0.197" (5mm)
Dimensions	68 x 68 x 151.6 mm
Display Type	Digital, LED
Function	Timer
Length	2.677" (68mm)
Mounting Style	Panel Mount
Number of Digits	6
Range, Measurement	0 to 99 hr.
Supply Voltage	115 VAC
Temperature, Operating, Maximum	50 °C
Temperature, Operating, Minimum	0 °C
Temperature, Operating, Range	0 to +50 °C
Terminal Type	Screw
Width	2.677" (68mm)
關鍵詞

• 參考圖片
• 制造商 / 說明 / 型號 / 倉庫庫存編號
• PDF
• 操作

• 
  
• ETI Systems
  Dial; Turns-Counting, Analog; 10 Turns; Shaft Dia 0.25in; For For potentiometers
  
  型號：DB10BL-1/4 SFT BLK
  倉庫庫存編號：70089318
  
• 
  
  
• 搜索

Brand/Series Libra Series  Red Lion Controls Brand/Series Libra Series  Digital Timers/Hour Meters Brand/Series Libra Series  Red Lion Controls Digital Timers/Hour Meters Brand/Series Libra Series   Cut Out, Panel 2.68 L x 2.68 H in., 68 L x 68 H mm  Red Lion Controls Cut Out, Panel 2.68 L x 2.68 H in., 68 L x 68 H mm  Digital Timers/Hour Meters Cut Out, Panel 2.68 L x 2.68 H in., 68 L x 68 H mm  Red Lion Controls Digital Timers/Hour Meters Cut Out, Panel 2.68 L x 2.68 H in., 68 L x 68 H mm   Depth 0.197" (5mm)  Red Lion Controls Depth 0.197" (5mm)  Digital Timers/Hour Meters Depth 0.197" (5mm)  Red Lion Controls Digital Timers/Hour Meters Depth 0.197" (5mm)   Dimensions 68 x 68 x 151.6 mm  Red Lion Controls Dimensions 68 x 68 x 151.6 mm  Digital Timers/Hour Meters Dimensions 68 x 68 x 151.6 mm  Red Lion Controls Digital Timers/Hour Meters Dimensions 68 x 68 x 151.6 mm   Display Type Digital, LED  Red Lion Controls Display Type Digital, LED  Digital Timers/Hour Meters Display Type Digital, LED  Red Lion Controls Digital Timers/Hour Meters Display Type Digital, LED   Function Timer  Red Lion Controls Function Timer  Digital Timers/Hour Meters Function Timer  Red Lion Controls Digital Timers/Hour Meters Function Timer   Length 2.677" (68mm)  Red Lion Controls Length 2.677" (68mm)  Digital Timers/Hour Meters Length 2.677" (68mm)  Red Lion Controls Digital Timers/Hour Meters Length 2.677" (68mm)   Mounting Style Panel Mount  Red Lion Controls Mounting Style Panel Mount  Digital Timers/Hour Meters Mounting Style Panel Mount  Red Lion Controls Digital Timers/Hour Meters Mounting Style Panel Mount   Number of Digits 6  Red Lion Controls Number of Digits 6  Digital Timers/Hour Meters Number of Digits 6  Red Lion Controls Digital Timers/Hour Meters Number of Digits 6   Range, Measurement 0 to 99 hr.  Red Lion Controls Range, Measurement 0 to 99 hr.  Digital Timers/Hour Meters Range, Measurement 0 to 99 hr.  Red Lion Controls Digital Timers/Hour Meters Range, Measurement 0 to 99 hr.   Supply Voltage 115 VAC  Red Lion Controls Supply Voltage 115 VAC  Digital Timers/Hour Meters Supply Voltage 115 VAC  Red Lion Controls Digital Timers/Hour Meters Supply Voltage 115 VAC   Temperature, Operating, Maximum 50 °C  Red Lion Controls Temperature, Operating, Maximum 50 °C  Digital Timers/Hour Meters Temperature, Operating, Maximum 50 °C  Red Lion Controls Digital Timers/Hour Meters Temperature, Operating, Maximum 50 °C   Temperature, Operating, Minimum 0 °C  Red Lion Controls Temperature, Operating, Minimum 0 °C  Digital Timers/Hour Meters Temperature, Operating, Minimum 0 °C  Red Lion Controls Digital Timers/Hour Meters Temperature, Operating, Minimum 0 °C   Temperature, Operating, Range 0 to +50 °C  Red Lion Controls Temperature, Operating, Range 0 to +50 °C  Digital Timers/Hour Meters Temperature, Operating, Range 0 to +50 °C  Red Lion Controls Digital Timers/Hour Meters Temperature, Operating, Range 0 to +50 °C   Terminal Type Screw  Red Lion Controls Terminal Type Screw  Digital Timers/Hour Meters Terminal Type Screw  Red Lion Controls Digital Timers/Hour Meters Terminal Type Screw   Width 2.677" (68mm)  Red Lion Controls Width 2.677" (68mm)  Digital Timers/Hour Meters Width 2.677" (68mm)  Red Lion Controls Digital Timers/Hour Meters Width 2.677" (68mm)