CUB5R000 - 

The CUB5 is a miniature 8-digit dual counter and rate indicator. The CUB5 provides up to three functions in a single display package. The display can be toggled either manually or automatically between the rate and counter display. The counters may be programmed for one of eight different count modes. The counters and rate indicator have separate scaling and decimal point placement for read-outs in different engineering units. Input A accepts a signal for the count and rate displays. Input B accepts a signal for the count display or direction control. In the anti-coincident mode, both inputs are monitored simultaneously so that no counts are lost. The rate indicator has programmable low minimum and high maximum update times to provide optimal display response at any input frequency. There is a programmable user input that can be set for one of a variety of functions.

Features:

LCD, Positive Reflective or Red LED Backlighting

0.46" High Digits

Programmable Decimal Point

Front Panel and Remote Reset

Count Speeds Up to 20 kHz

Programmable Prescaler for Totaling

Bi-Directional Counting, Up-Down Control, Quadrature

Batch Counting Capabilities

Sensing

Anti-Coincidence Counting

Separate Count and Rate Input Mode

Dual Counter Mode

Count Input Voltage Up to +28 VDC

NEMA 4X/IP65 Sealed Front Bezel

Specifications:

Display: 8-Digit LCD 0.46" High Digits; Positive Image Reflective or Negative Image-Transmissive with Red/Green Backlighting

Power Requirements: Input Voltage Range Is +9 to +28 VDC with Short Circuit and Input Polarity Protection. Must Use an RLC Model MLPS1 or a Class 2 or SELV Rated Power Supply

Memory: Nonvolatile EEPROM

User Input: Programmable, Connect to Common to Activate Function

Rate Minimum Input Frequency: 0.01 Hz

Rate Maximum Frequency: 20 kHz

Operating Temperature: 0 to 60°C

Panel Cutout: 2.68" × 1.30"