EQCO-FASTECOAX7501.2產(chǎn)品概述
The FastECoax-7502.2 Ethernet over coaxial cable adapters transmits 10/100base-T Ethernet over standard coaxial cables. These adapters are installed in pairs. The "Head-End" adapter takes conventional 100base-T Ethernet & power from a PoE compliant Ethernet switch, a PoE injector or an AC adapter. Power and bidirectional data is passed over the coax to the "Camera-Side" adapter at the far end which in turn optionally powers the IP camera.
Note: The EQCO-FASTECOAX7501.2 is a set. The transmitter and receiver are included in the order. The chip inside both the transmitter and receiver units is the EQCO875SC.3.
Features:
Utilizes existing analog video cabling (75-ohm coax)
Fully compliant to 100BaseT Full duplex Ethernet
Supports pass through link status
Supports Full 100 Mbps FDX up to 250 m over RG6 coax (cable dependent)
Supports 10/100base-T Ethernet for SD and HD video cameras
Supports Power-over-Ethernet (PoE)
Optional DC input for power pas through
Optional DC output to power remote device
Small Enclosure (70 mm x 37 mm) can be wall mounted
Datasheet
