10028917-001LF - 

Overview:
Hard Metric High Power Connectors are a perfect complement to FCI‘s high speed ZipLine® and AirMax VS® signal connectors as well as Millipacs®.These power connectors mount alongside their signal counterparts and are used in applications where bulk current must pass through a backplane or midplane to power consuming components on a mating daughter card (blades, controller boards, etc).

The power contacts incorporate multiple points of contact and are made using a high conductivity copper alloy. In addition, the unique housing design includes openings that allow air to flow through the mated connectors thus enhancing heat dissipation properties. These design features enable the connector system‘s high current-carrying capability.

Contacts in the 1×2 version carry 40 amps per contact for a total of 80 amps per module. Contacts in the 2×2 and 2×3 modules carry 20 amps per contact. Please reference the current rating information in the Hard Metric High Power Product Specification (GS-12-220) for additional details.

Each header offers 2, 4 or 6 individual power contacts positioned in 1×2, 2×2 or 2×3 arrays. The backplane receptacles are offered in 2×2 and 2×3 configurations with the 2×2 receptacle mating to either the 1×2 or 2×2 header configuration. The protected backplane receptacles are UL 60950 Compliant (Finger Probe).

Features:

Current rating to 80 amps for 1×2 or 2×2 modules; 120 amps for 2×3 module

Hard Metric (HM) Equipment Practice

Layout compatible with ZipLine®, AirMax VS® and Millipacs connector series

1×2, 2×2 or 2×3 contact configurations for backplane applications

Standard-profile 1×2 and 2×2 right-angle modules extend 14.7mm above the PCB

Lower-profile 2×2 and 2×3 modules stand only 11.5mm above board

Options for first-mate/last-break sequencing; 2 mating lengths available

Protected backplane receptacle is UL 60950 Compliant (Finger Probe)Options for 1×2 or 2×2 co-planar applications

Press-fit termination

Compatible with lead-free processing temperatures