SLA-575-ALE - 

The ATC Diversified SLA Series is designed to protect 3-phase equipment against pahse loss, undervoltage, and phase reversal conditions.

With normal operating voltages applied in the proper ABC sequence, the internal relay will energize (pick-up). When incorrect phase sequence or phase loss occurs or the three-phase voltages fall below the drop out voltages, the relay will de-energize (drop-out). On models featuring indicators, the LED glows when all line conditions are normal.

Both Delta and Wye systems may be monitored. In Wye systems, connections to neutral are NOT required.

For UL Listed units, with field wiring terminals, copper wire with 60°/ 75°C rating must be used for control circuitry connections.

NOTE: When a phase is lost while the motor is running, a condition known as regeneration occurs where a voltage is induced into the open phase nearly equal in magnitude to the normal phase-to-phase voltage. However, with the exception of lightly loaded motors, enough change is detected by the SLA to provide the required protection when properly adjusted.

Features:

Available Up to 480 VAC

Delta or Wye Systems

Fixed, Lock Shaft, or Screwdriver Adjustment

Several Enclosure Styles

Protects 3-Phase Quipment Against:

Phase Loss

Undervoltage

Phase Reversal

Typical Applications:

Air Handlers

Computer Power Protection

Conveyor Drive

Water Waste and Sewage Machinery

Oil and Gas Pumps

Sawmill and Woodpump Machinery

Power Substation

Automatic Transfer Switching for Monitoring Emergency Power Supplies

Irrigation Pumps

Lift Station Pumps

Robotics Equipment

Elevator Drives

Commercial/Industrial Air Conditioning and Refrigeration Compressors